raw materials are synthetic polymer material (polyester

 suitable for intense exercise. 7. before wearing the shoes, the best placed in a ventilated place so that shoes and have plenty of time to blow.8. athletes or sports enthusiasts should always wear the shoes purchased. in order to extend the life of shoes and washing as little as possible. 9. the shoes are dry, use shoe will help the shoes to return to his original form; or newspapers on a shoe. newspapers serve a function, it can not only help to restore the shoe itself, and can rapidly absorb moisture in the shoe. 10. the soles on shoe head toward the wall, ventilated place to dry  vibram five fingers at room temperature ... This will prevent moisture ingress in low foam material. (Because the foam material is not easy to do, it is recommended that do not put wet shoes.) 11. the shoes dry off the newspaper out let shoes dry for a while. 12. too much direct sunlight,Hair dryers heat and improper care

 will reduce the life of the shoe. How to wipe your shoes to ensure maintenance work? 1, when the shoes dirty, dip water detergent gently, then rinse with water, placed ventilation and shade dry, avoid direct sunlight. Avoid the use of heat or open flames to dry, so as to avoid fading and aging, glue, badly disfigured. Too much direct sunlight, heat of the hairdryer and improper care will  nike blazer mid reduce the life of the shoes; not long time to wash soak, soaking time should not exceed 20 minutes. Leather can not be soaked in water. 2, sneakers and most raw materials are synthetic polymer material (polyester non-woven base and nylon mesh leather, soles are made of rubber or foam rubber material), and some shoe upper leather, so avoid contact with aqueous organic solvents and oils, but also should not be in an environment of high temperature long time wear. Normal wear or wash

temperature should not be higher than 45 degrees Celsius. 3, if stored for a long time, shoes should be cleaned, dry store placed a cool, well ventilated place so that shoes and have plenty of time to blow dry,To avoid mildew. Leather shoes with the best paper or shoes hold up, so as not to severely deformed. The soles on shoe head toward the wall, ventilated place to dry at room temperature, this will prevent water ingress midsole foam. (Because the foam material is not easy to do, it is recommended that do not put wet shoes. ) 4, for the use of shoes look more beautiful, asks you to wear or cleaning process do not use hard brushes or overexert, much less using a nail or sharp object to pull the corner part of the printed pattern. Wearing after a while, some some minor cracking may occur on the surface of the pattern (especially the often tortuous part), this is normal. 5, in order to